Jump to content

Ballast not working


Recommended Posts

I have a 2007 B52 23v and last trip out i went to fill my ballast and the right side was making a louder noise than normal and was not filling. You could hear air being sucked through the side where the empty port is. I also noticed that during the trip the left side would fill by itself (leak by) overnight while at the docks.  Both had ballast plugs in. I dont know if this is a priming issue or if its a bad motor/impeller of pump. Please help!

Link to comment
Share on other sites

Do you have the green impellers? Also check your check valves on the side of the pump where it exits the boat. If the valve has gone bad, you will be sucking air when trying to get water. Easy way to verify bad valve is to pick up a couple of those rubber corks from lowes and plug the holes on the back of the boat where the water gets pumped out. If it fills fine when they are plugged, you have either an air leak in the hose or a bad check valve.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...