Jump to content


Photo

FS - Acme 2775


  • This topic is locked This topic is locked
11 replies to this topic

#1 breakz77

breakz77

    Advanced Member

  • Members
  • PipPipPip
  • 783 posts
  • LocationDiscovery Bay
  • Hometown Lake:Dirty D

Posted 06 May 2019 - 11:40 AM

Perfect condition
$400 plus shipping

Posted Image
Posted Image


Sent from my iPhone using Tapatalk
  • Jake (((O))) and bloodiestcadaver like this

It's not what you land.. it's how big you go


#2 Sbentz101

Sbentz101

    Advanced Member

  • Members
  • PipPipPip
  • 130 posts
  • LocationAlaska
  • Hometown Lake:Big lake

Posted 08 May 2019 - 02:24 PM

What boat did you run this on and why selling now? Just curious if I'm gonna not need it at sea level with 400 motor on the 19 23ft?

#3 breakz77

breakz77

    Advanced Member

  • Members
  • PipPipPip
  • 783 posts
  • LocationDiscovery Bay
  • Hometown Lake:Dirty D

Posted 08 May 2019 - 03:57 PM

What boat did you run this on and why selling now? Just curious if I'm gonna not need it at sea level with 400 motor on the 19 23ft?

 

I had it for a 2017 F22 Tomcat. If you're going to run fully loaded or extra weight it will get you out of the hole much faster.

 

I'm selling because I need a different prop for the Malibu :)


It's not what you land.. it's how big you go


#4 Sbentz101

Sbentz101

    Advanced Member

  • Members
  • PipPipPip
  • 130 posts
  • LocationAlaska
  • Hometown Lake:Big lake

Posted 08 May 2019 - 04:05 PM

So, lower rpm at surf speed with this?

#5 bloodiestcadaver

bloodiestcadaver

    Advanced Member

  • Members
  • PipPipPip
  • 406 posts
  • Locationutah
  • Hometown Lake:rockport, jordanelle, echo, east canyon

Posted 08 May 2019 - 04:07 PM

So, lower rpm at surf speed with this?

at high elevation (5900) I'm 4500 rpm surf speed. 



#6 Sbentz101

Sbentz101

    Advanced Member

  • Members
  • PipPipPip
  • 130 posts
  • LocationAlaska
  • Hometown Lake:Big lake

Posted 08 May 2019 - 04:16 PM

Going to be hard to get used to that, my sanger surf rpm is like 3500. 20ft boat with less ballast, overall about 2800lbs less weight same motor so expected I guess.

#7 oldsmobiledriver

oldsmobiledriver

    Advanced Member

  • Members
  • PipPipPip
  • 4,535 posts
  • LocationAmarillo, TX
  • Hometown Lake:Tanglewood

Posted 08 May 2019 - 06:11 PM

Real boat, real weight, real rpm!!! 😂
My 343 turns 3500


Sent from my iPhone using Tapatalk

71 Olds Cutlass, 70 3 door Suburban, 15 X5 Sport pkg, 2012 F21 Tomcat: Surf Machine!!!
http://i260.photobuc...st/IMG_4360.jpg


#8 OrangeTJ

OrangeTJ

    Advanced Member

  • Members
  • PipPipPip
  • 767 posts
  • LocationNorthern CA
  • Hometown Lake:Folsom Lake

Posted 08 May 2019 - 08:40 PM

Absolutely not lower surf rpm with the 2775 if you are on a boat with a 1.76 transmission.  Will pull just about any load but there's no free lunch.  I had a 2775 and found it too aggressive on my 16 F22. Surfing pulled about 4500 rpm, which I did not enjoy.  Moved to a 2249, which worked very well and pulled any load I wanted but still surfed and cruised at higher rpm than I like (4000 - 4300 surfing and about 25 mph at 4000 rpm).  Moved to a 2279 and now surf rpm is 3600 - 3900 depending on weight and how it is distributed.  Also cruises at 25 mph at 3500 rpm,, 28 at 4K rpm and 39 at WOT, whereas the 2775 got me 22.5 mph at 4000 rpm and 32 at WOT.

 

2775 is a fine prop and great for getting virtually any load up on plane but don't look for reduced rpm.



#9 Sbentz101

Sbentz101

    Advanced Member

  • Members
  • PipPipPip
  • 130 posts
  • LocationAlaska
  • Hometown Lake:Big lake

Posted 08 May 2019 - 11:11 PM

Absolutely not lower surf rpm with the 2775 if you are on a boat with a 1.76 transmission. Will pull just about any load but there's no free lunch. I had a 2775 and found it too aggressive on my 16 F22. Surfing pulled about 4500 rpm, which I did not enjoy. Moved to a 2249, which worked very well and pulled any load I wanted but still surfed and cruised at higher rpm than I like (4000 - 4300 surfing and about 25 mph at 4000 rpm). Moved to a 2279 and now surf rpm is 3600 - 3900 depending on weight and how it is distributed. Also cruises at 25 mph at 3500 rpm,, 28 at 4K rpm and 39 at WOT, whereas the 2775 got me 22.5 mph at 4000 rpm and 32 at WOT.

2775 is a fine prop and great for getting virtually any load up on plane but don't look for reduced rpm.

Thanks for the breakdown. I'll start with stock prop with the new boat and see how it does.

#10 Kalen427

Kalen427

    Advanced Member

  • Members
  • PipPipPip
  • 130 posts
  • LocationHenderson, NV
  • Hometown Lake:Lake Mead

Posted 10 May 2019 - 07:37 PM

what prop do you need for your bu?



#11 breakz77

breakz77

    Advanced Member

  • Members
  • PipPipPip
  • 783 posts
  • LocationDiscovery Bay
  • Hometown Lake:Dirty D

Posted 12 May 2019 - 05:08 PM

Sold


Sent from my iPhone using Tapatalk

It's not what you land.. it's how big you go


#12 breakz77

breakz77

    Advanced Member

  • Members
  • PipPipPip
  • 783 posts
  • LocationDiscovery Bay
  • Hometown Lake:Dirty D

Posted 12 May 2019 - 05:09 PM

what prop do you need for your bu?


2247 or 2249


Sent from my iPhone using Tapatalk

It's not what you land.. it's how big you go





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users