Ahard50 Posted January 29, 2022 Report Share Posted January 29, 2022 Obligatory new guy question here. I have an ‘11 f21 with hard tanks, PnP sacs (800# per side) and bow sac (~400#). Propped appropriately. I currently use a suck gate because boat has no surf system or center plate. I am looking to upgrade to legitimate system. Anyone install Infinity wave, GSA, Super surf’r, DIY trim tabs, on a f21? If so results? I understand GSA is probably the best but it also costs the most. I have to question if the difference is worth it. Quote Link to comment Share on other sites More sharing options...
AZ_MB Posted January 29, 2022 Report Share Posted January 29, 2022 Many people have installed DIY gates (aka goose slappers). There's a full write-up pinned to the top of the Maintenance section of the forum. http://www.mbboatowners.com/index.php?/topic/4331-slappers-kcso-part-1/ Ahard50 1 Quote Link to comment Share on other sites More sharing options...
Hyperryd Posted January 29, 2022 Report Share Posted January 29, 2022 This is the wave behind a slapped 2013 F21. 650# sacs in the rear with about 3/4 full tanks and 400# lead wake in the nose. 360CDF6D-FF35-4D93-8594-E8D2339BCA62.MOV Ahard50 1 Quote Link to comment Share on other sites More sharing options...
Hyperryd Posted January 29, 2022 Report Share Posted January 29, 2022 Regular side was great too. Same settings except full tank on Port side. 11.3mph E997D7F5-068B-4C0F-BC31-C80130557C22.MOV Ahard50 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.