yellj Posted February 24, 2011 Report Share Posted February 24, 2011 We have never anchored, we just pull back to the lift or dock when we are done boarding. Probably will do some hanging out in a cove this coming season, what is the best way to anchor and with what type of anchor(s)? TIA Quote Link to comment Share on other sites More sharing options...
Guest admin Posted February 24, 2011 Report Share Posted February 24, 2011 I think it really depends on what type of lake bottom you have. Also, make sure that you get an anchor chain. Quote Link to comment Share on other sites More sharing options...
yellj Posted February 25, 2011 Author Report Share Posted February 25, 2011 It is at Lake Anna in Va, mixture of mud/clay and sand. Varies a bit depending on where you are in the lake. So I guess I am looking for something that is a little more universal. Quote Link to comment Share on other sites More sharing options...
driverlost Posted February 25, 2011 Report Share Posted February 25, 2011 I have used this successfully on the Potomac when it was flowing at its usual summer pace. the 18lb one will do you just fine at lake anna and should be sufficient if you take the boat on some of the rivers in your area as well. http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?partNumber=4565552&catalogId=10001&storeId=11151&langId=-1#showReviews Quote Link to comment Share on other sites More sharing options...
dtown Posted February 25, 2011 Report Share Posted February 25, 2011 Do yourself a big favor and make the 1st anchor you buy, the last anchor you buy... I've tried them all and the box anchor is awsome! It is well worth the little extra coin over a typical mushroom or danforth. They even fold flat for great storage. http://www.slideanchor.com/Hlm_ShopIT_ProductDetails.aspx?ID=024a8189-c4ba-41dc-9a41-c5e749bb8688 2 years ago we were tied up with a bunch of other boats. There were 3 danforths already out when we pulled up so we just tied up to the other boats and didn't throw out an anchor. The wind came up, pulled the three danforths loose. The goup was puckered as all the boats tied together were quickly drifting towards a rocky outcropping. I quickly threw our box anchor overboard, and that anchor alone stopped the whole group. That event made me a believer. Quote Link to comment Share on other sites More sharing options...
Guest admin Posted February 25, 2011 Report Share Posted February 25, 2011 I just bought a box anchor from the link above. My other anchors were crap last year. WE get some good wind in our "party" cove here. Hopefully that does the trick. Quote Link to comment Share on other sites More sharing options...
yellj Posted February 25, 2011 Author Report Share Posted February 25, 2011 Could you give some tips on how you set it, what size box anchor, did you go with small, looks like that is what is recommended? What type of anchor line are you using? Thanks Quote Link to comment Share on other sites More sharing options...
dan.smith Posted February 26, 2011 Report Share Posted February 26, 2011 admin wrote: Also, make sure that you get an anchor chain. I've always just used old tow ropes. And the one DRIVERLOST referenced didn't work for me on LKA. I had to go with this kind instead: http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=247428&catalogId=10001&langId=-1&storeId=11151&storeNum=10105&subdeptNum=10372&classNum=10418 I think there is more rock/debris on the Potomac than @ Anna, and the mushroom anchor doesn't dig in enough. Quote Link to comment Share on other sites More sharing options...
dtown Posted February 27, 2011 Report Share Posted February 27, 2011 We have a small one. We use a braided rope from Harbor Freight (cheap). I like braided line because it has a little bit of stretch... A little bit of give on the bow hook when the nose is bobbing up and down if rollers come by. We also use a quick cleat from that same company. Very handy for adjusting line length. Quote Link to comment Share on other sites More sharing options...
mlb75 Posted March 1, 2011 Report Share Posted March 1, 2011 I use one just like dan posted and have for YEARS. The trick with most anchors is knowing how to use them properly. For a plow or danforth style you need to have 6-10 feet of chain and then use roughly 6" of line for every 1" of water depth, if you do that it's gonna hold. Only other thing you must do is properly set it, to do that you pull past where you want to end up throw the anchor over and then allow the wind / current to set you back to the right spot that way the anchor line is able to lay out and then dig the anchor in as it's pulled flat across the bottom to set. I've heard a lot of good things about the box style anchors but being more used to big boats I use what I know and not to be funny but when was the last time you saw a 30+ footer using a box overnight. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.